Special on NOT PERFECT Seconds - Limited Stock, grab yourself a bargain!
 
Not all saveBOARD finished products are created the same, however, we believe imperfect doesn’t mean unusable. At saveBOARD we aim to divert as much waste from landfill as we can and that includes our own waste! Our ‘not perfect seconds’ boards, are sheets that haven’t quite made A-grade standard, but meet all building compliance standards.
 
NOT PERFECT Seconds​​ Exposed Internal Lining may contain some of the following: fine creases, edge variation, thickness and or colour variations. The core of the board is structurally the same however they aren't perfect.
 
Our ‘not perfect seconds’ boards would be perfect to use in a garage, shed, workshop, cabin or rumpus room
 
APPLICATION
Pre-finished Interior Wall and Ceilings.
Garage lining instead of plywood or plasterboard
High impact areas.
Commercial spaces where wear marks on the surface won't be noticeable due to textured finish.
Suitable for external facing walls if a home has a continuous mechanical ventilation system installed.
 
DESCRIPTION
Pre-finished Interior Wall and Ceiling Board.
Square finished edges
No need to paint, plaster or cover fixings
Every board is different, but made from the same feedstock material to provide a consistent blend of colours.
Screw anything direct to the surface, no need to find studs.
Available in a range of colours and patterns (made from waste) which are dependent on which product being processed.
Excellent wind and seismic bracing applications.
Mould resistant
Water repellent, but not a replacement for bathroom plasterboard. 
ZERO Water, Glues, Chemicals added. VOC's and Formaldehydes are < 1% of the Green Building Standard (0.004mg/m2/hr) 
Declare label: Our products have been determined to meet the requirements for all applicable Imperatives of the Living Building Challenge: 
 
COMPLIANCE
saveBOARD is also recognised as 1 of 5 product substitutions for plasterboard in New Zealand and has been extensively around the country.
 
Pickup is Te Rapa, Hamilton or shipping at buyers cost. We have a forklift on site that can help load your trailer with our pallet. Otherwise use the freight pricing in the checkout which are based on pallet loads (35x sheets) to urban areas only – no rural deliveries. If you only want to order a small number of sheets please email us on enquiries@saveboard.nz to provide a specific shipping quote.
 
Note: Boards must be manually unloaded. If a hiab is required, this will be charged at cost as an extra by the freight company.